SI 2000 – 3000
Vacuum recovery unit SI 2000 and 3000 built into a 10 ft container consisting of:
- Vacuum pump (blower)
- Frame for motor and fan with vibration damper
- Cartridge filter type Pat-Jet 7/13 with:
- 7 cartridges 13 m2, length of 1 meter, PES 2
- 3 Magnet valves
- Electronic control of the valves
- Air adjustment
- Filter with tangential inlet and dust collector
- Control filter with 3 cartridges
- Pulsation damper and adsorption damper
- Non-return valve and a back pressure valve
- 2 Flexibel connections
- 2 Manometers
- Thermostat
Type SI - 2000 - 7/13 - 37
Performance 1.700 m3/h by 480 mbar, 2950 rpm, Power requirement at shaft 30,5 kW.
Direct driven electric motor 37 kW, 400 Volt.
Inlet 5 inches.
Suction unit built in a 10 ft container
Dimensions: 3.000 x 2.500 x 2.400 mm (L x W x H)
Weight: 2.400 kg
Type SI - 3000 - 7/13 - 55 laut Zeichnung 9608- 13965D, code 6001.300713
Performance 2.800 m3/h by 480 mbar, 3380 rpm, Power requirement at shaft 49 kW.
V-belt driven electric motor 55 kW, 400 Volt.
Protection case for V-belt
Inlet 6 inches.
Suction unit built in 10 ft container,
Dimensions: 3.000 x 2.500 x 2.400 mm (L x W x H)
Weight: 2.700 kg
For all types of suction units:
Abrasive pre-separator with discontinuous flow.
Emptying after stopping the suction unit. Capacity 400 liter.
Pre-separator equipped with level sensors, to automaticcaly switch the system on and off for emptying.